139娱乐棋牌

Home >> News

HOT PRODUCTS

    Shijiazhuang wufeng thermal machinery Co.,LTD is a company

    Shijiazhuang wufeng thermal machinery Co.,LTD is a company that specialize in manufacturing the glass m-at treatment furnace. The production base locates in the convenient transport Shijiazhuang wufeng thermal machinery Co.,LTD is a company that specialize in manufacturing the
    Shijiazhuang wufeng thermal machinery Co.,LTD is a company that specialize in manufacturing the glass m-at treatment furnace. The production base locates in the convenient transport Shijiazhuang wufeng thermal machinery Co.,LTD is a company that specialize in manufacturing the

    139娱乐棋牌Glass tempering furnace use and maintenance considerations

    Glass Tempering furnace is equipment of producing the tempered glass with physical or chemical methods, glass tempering furnace139娱乐棋牌 use and maintenance considerations as follows:

     
      1 Loading machine must be cleaned once per shift, to prevent dust from entering the tempering furnace, causing the ceramic roller is contaminated (produce small pitting);
     
      2 For high-volume, continuous production (24 hours non-stop oven), in order to keep the surface of ceramic roller smooth, reduce the glass rubbing against ceramic roller, requiring constant added SO2 to the furnace (sulfur sublimation), the Department recommended every 10 days plus once every about 20 grams, the amount should not be too large to prevent damage to the ceramic rollers and heating element.
     
      3 When they find glass "fryer", it must be timely cool and clean ceramic roller, do not use glass to rinse ceramic roller, if it is not clean with using glass cleaning, the remnants of the glass is damaged to the ceramic rollers extremely large.
     
      4 Selection and use of heating temperature should be appropriate, the heating temperature is not too high, it is wrong that in order to improve the yield prolonged heating time, ceramic glass surface will thus forming roller intensive pitting, the white dots in the glass surface is sticky from the ceramic roll surface taken.
     
      5 Once the glass surface has pitting (wind gate roller is not clean, the furnace temperature is too high, except for reasons too long), shall promptly clean ceramic rollers.
     
      6 Ceramic roller surface has prominence, you can use water above 400 mesh sanding, sanding after cleaning with carbon tetrachloride, so polished off the powder attached to the ceramic roller surface. White cloth dampened with carbon tetrachloride used in cotton and soft, lint-free material is better to be careful when cleaning ceramic roller, carefully, avoid using the mop barbaric operation;
     
      7 If you use distilled water or purified water to clean ceramic roller, should be noted: Ceramic roller surface of the water does not evaporate quickly, non-ceramic roller surface with water rapid warming, should avoid the impact on the adverse effects of ceramic rollers.
    If you have any question about glass tempering furnace, please contact us, we will be first-class service to meet your needs. Welcome to inquire.

    Previous news:Glass tempering furnace safety operation and maintenance procedures

    Next News:The methods to impove glass strength of tempering furnace

Home|About us|Products| Honor|Project|News| Contact us

Copyright©2000-2015 Shijiazhuang Wufeng Thermal Machinery Co.,Ltd. All Rights Reserved